+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: (DG) T120 replacement set up (/showthread.php?tid=5243)
(DG) T120 replacement set up - GLE - 04-19-18 08:42 AM
I have a replacement T120 wind transmitter for use with a Tacktick MN100 display.
Looking for instructions on how to sync the new masthead device. Any help or setup document is appreciated. Thank you
RE: (DG) T120 replacement set up - Derek - Raymarine - Moderator - 04-20-18 05:15 AM
Hi GLE
Thank you for your enquiry below.
The new Masthead Transmitter will need to be Auto Networked to the existing displays on the boat, for this to happen the masthead transmitter must be positioned within 300mm of the display.
Full instructions can be found on the Raymarine website select here and then search in the DOCUMENTS section for the Autonetworking guide.
regards
RE: (DG) T120 replacement set up - GLE - 04-20-18 08:10 AM
Thank you -
just to confirm transmitter distance...300 millimeters? like side by side?
RE: (DG) T120 replacement set up - Derek - Raymarine - Moderator - 04-20-18 08:33 AM
Hi GLE
Yes, 300mm - side by side.
thanks