+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] C-classic to Axiom Pro (/showthread.php?tid=6132)
[CA11] C-classic to Axiom Pro - zelatore - 07-18-18 12:00 AM
I have a newly aquired (used) boat with an older C-Series (classic) MFD installed including a black box sonar believed to be a DSM30 or 300. I would like to upgrade the system to a new Axiom Pro unit. Will any variant of the Axiom Pro drive the existing transducers used with by the older DSM unit, perhaps via an adapter cable?
RE: [CA11] C-classic to Axiom Pro - Chuck - Raymarine - Moderator - 07-19-18 03:40 PM
Welcome to the Raymarine Forum zelatore,
Should the currently installed transducer's plug be directly interfaced to the DSM250, DSM30, or DSM300 which is presently interfaced to the C-Series Classic MFD, then this transducer may be adapted (part #A80496) to be mated to the 1kW Transducer socket of an Axiom Pro RVX MFD.