+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [DG] [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data (/showthread.php?tid=6134)
[DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data - Harri - 07-18-18 04:22 AM
Hi,
We have EV100 wheel pilot and Axiom plotter in SeatalkNG which is bridged to N2k network in which we have wind (speed, depth, temp) data available. Now the issue is that EV100 does not recognise wind data and we are not able to use any wind modes of autopilot. However Axiom and EV100 do recognise and shows depth/boatspeed data also originated from n2k sensors.
Any advice appreciated.
Best regards,
Harri
RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data - Derek - Raymarine - Moderator - 07-19-18 09:08 AM
Hi Harri,
Thank you for your enquiry.
it would be really useful to have a system drawing so that we know exactly how the equipment is all connected, as well as exactly what each of the units is, i60, i50 or ST60?
thanks
Derek
RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data - Harri - 07-20-18 06:14 AM
I will get back to you soon. Thanks,
Harri
RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data - Derek - Raymarine - Moderator - 07-20-18 11:04 AM
Thanks Harri
Derek
RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data - Harri - 07-23-18 01:39 PM
We got this one resolved. (The boat type was wrong).
Thanks for your response anyway.
Harri
RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data - Derek - Raymarine - Moderator - 07-24-18 11:15 AM
Hi Harri,
Glad to hear you are sorted out
Best regards
Derek