[DG] [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data
|
07-18-18, 04:22 AM
(This post was last modified: 07-18-18 03:47 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data
Hi,
We have EV100 wheel pilot and Axiom plotter in SeatalkNG which is bridged to N2k network in which we have wind (speed, depth, temp) data available. Now the issue is that EV100 does not recognise wind data and we are not able to use any wind modes of autopilot. However Axiom and EV100 do recognise and shows depth/boatspeed data also originated from n2k sensors. Any advice appreciated. Best regards, Harri |
|||
07-19-18, 09:08 AM
Post: #2
|
|||
|
|||
RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data
Hi Harri,
Thank you for your enquiry. it would be really useful to have a system drawing so that we know exactly how the equipment is all connected, as well as exactly what each of the units is, i60, i50 or ST60? thanks Derek |
|||
07-20-18, 06:14 AM
(This post was last modified: 07-20-18 11:02 AM by Derek - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data
I will get back to you soon. Thanks,
Harri |
|||
07-20-18, 11:04 AM
Post: #4
|
|||
|
|||
RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data
Thanks Harri
Derek |
|||
07-23-18, 01:39 PM
(This post was last modified: 07-23-18 01:41 PM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data
We got this one resolved. (The boat type was wrong).
Thanks for your response anyway. Harri |
|||
07-24-18, 11:15 AM
Post: #6
|
|||
|
|||
RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data
Hi Harri,
Glad to hear you are sorted out Best regards Derek |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)