+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Radar (/forumdisplay.php?fid=125)
+--- Thread: [CA] [CA11] Grinding noise from quantum radar (/showthread.php?tid=6497)
[CA11] Grinding noise from quantum radar - delsey - 08-27-18 04:07 PM
We tied up at a dock and turned the engines off - and noticed a strange grinding/vibrating noise. On investigation we determined that it was coming from the radar unit.
The same noise was heard when we got back to our dock - I took the following video:
https://www.youtube.com/watch?v=Iv0hSGaXUdE
Whilst the radar is still functioning we are concerned that this could be a mechanical issue?
RE: [CA11] Grinding noise from quantum radar - Chuck - Raymarine - Moderator - 08-29-18 03:45 PM
Welcome to the Raymarine Forum delsey,
When operating, the radome should be virtually silent and not making the noise portrayed within the video which you have linked. It is recommended that the radome be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
RE: [CA11] Grinding noise from quantum radar - delsey - 08-30-18 04:06 PM
Thank you - we will work through our supplier to progress this issue.
RE: [CA11] Grinding noise from quantum radar - Chuck - Raymarine - Moderator - 08-31-18 09:21 AM
You're welcome.