Raymarine forum
[CA] [CA11] Is the gyroplus 2 compatible with st2000+ - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] [CA11] Is the gyroplus 2 compatible with st2000+ (/showthread.php?tid=6835)



[CA11] Is the gyroplus 2 compatible with st2000+ - Yourmomm - 10-25-18 11:41 PM

Hi, I've inherited a gyroplus 2, and the manual says that its can feed accurate heading data to st4000 and later autopilot control heads. Is this also the case for earlier autopilots? I have a perfectly serviceable st2000 and dont want to change it....

Thanks for your advice.


RE: [CA11] Is the gyroplus 2 compatible with st2000+ - Chuck - Raymarine - Moderator - 10-26-18 08:36 AM

Welcome to the Raymarine Forum Yourmomm,

Unlike the S1, S2 or S3 autopilot course computers and ST4000+ / ST5000+ autopilot systems identified within the Smart Heading System's Owner's Manual, the ST2000+ neither features the ability to process NMEA 0183 HDM sentences nor to calibrate an external heading source. The heading data rate on a SeaTalk bus is 1Hz, which is much too slow for an autopilot.