+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Marine Cameras (/forumdisplay.php?fid=121)
+--- Thread: [CA] [CA11] E120W & IP200 camera (/showthread.php?tid=8056)
[CA11] E120W & IP200 camera - nauelec - 04-27-19 05:18 AM
Hi.
Thanks for your helpfull job.
I need to know if it's possible to connet a IP200 camera in a STHS network to show video in 2x E120W or it's only possible a analog connection via BNC-power connector.
Thanks a lot for your help!
RE: [CA11] E120W & IP200 camera - Chuck - Raymarine - Moderator - 04-29-19 12:39 PM
Welcome to the Raymarine Forum nauelec,
Unfortunately, the software of the C/E-Series Widescreen MFDs, E-Series Classic MFDs, and G-Series GPM400s is not designed to process video from an IP camera. The first Raymarine MFDs feature support for IP cameras were the a/c/e/eS/gS-Series MFDs which had been updated to run the latest LightHouse II software. Raymarine offers the CAM100 and CAM50 NTSC & PAL cameras for use with the C/E-Series Widescreen MFDs, E-Series Classic MFDs, and G-Series GPM400s.