[CA] [CA11] E120W & IP200 camera

[nauelec]

Hi.
Thanks for your helpfull job.
I need to know if it's possible to connet a IP200 camera in a STHS network to show video in 2x E120W or it's only possible a analog connection via BNC-power connector.
Thanks a lot for your help!

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum nauelec,

Unfortunately, the software of the C/E-Series Widescreen MFDs, E-Series Classic MFDs, and G-Series GPM400s is not designed to process video from an IP camera. The first Raymarine MFDs feature support for IP cameras were the a/c/e/eS/gS-Series MFDs which had been updated to run the latest LightHouse II software. Raymarine offers the CAM100 and CAM50 NTSC & PAL cameras for use with the C/E-Series Widescreen MFDs, E-Series Classic MFDs, and G-Series GPM400s.