+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] [CA11] ES 127 transducer (/showthread.php?tid=8334)
[CA11] ES 127 transducer - becnme - 05-24-19 08:00 AM
I recently replaced a B744V transducer that feeds an Es127 MFD. I had this transducer installed during a recent bottom job without checking the connections and when we went to hook it up found we had the wrong connector. The old transducer was a
31-668-2-02 and we installed a 31-669-1-01. Is it possible to cut and splice these cables? Any other suggestions without pulling the boat again?
RE: [CA11] ES 127 transducer - Chuck - Raymarine - Moderator - 05-28-19 03:31 PM
Welcome to the Raymarine Forum becnme,
Do not cut the transducer's cable. Airmar's 31-669-1-01 variant of the B744V was designed for use with Raymarine's CP370, CP300, DSM300, DSM30, DSM250 sounder modules and hsb/hsb2/SL Pathfinder Series Fishfinders. Transducers designed for use with these fishfinding products may be adapted for use with an ax7/cx7/e7D/eSx7 MFD by using the E66066 Transducer Adapter Cable.