Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ES 127 transducer
05-24-19, 08:00 AM (This post was last modified: 05-28-19 03:27 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ES 127 transducer
I recently replaced a B744V transducer that feeds an Es127 MFD. I had this transducer installed during a recent bottom job without checking the connections and when we went to hook it up found we had the wrong connector. The old transducer was a
31-668-2-02 and we installed a 31-669-1-01. Is it possible to cut and splice these cables? Any other suggestions without pulling the boat again?
Find all posts by this user
Quote this message in a reply
05-28-19, 03:31 PM
Post: #2
RE: [CA11] ES 127 transducer
Welcome to the Raymarine Forum becnme,

Do not cut the transducer's cable. Airmar's 31-669-1-01 variant of the B744V was designed for use with Raymarine's CP370, CP300, DSM300, DSM30, DSM250 sounder modules and hsb/hsb2/SL Pathfinder Series Fishfinders. Transducers designed for use with these fishfinding products may be adapted for use with an ax7/cx7/e7D/eSx7 MFD by using the E66066 Transducer Adapter Cable.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)