Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] i50 depth transducer compatability

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] i50 depth transducer compatability
12-04-19, 06:33 PM (This post was last modified: 12-05-19 10:42 AM by Chuck - Raymarine - Moderator.)
Post: #1
bwehmer Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2016
Reputation: 0
[CA11] i50 depth transducer compatability
Does the i50 depth transducer fit into the thru hull of the ST50+ transducer?
Find all posts by this user
Quote this message in a reply
12-05-19, 11:09 AM (This post was last modified: 12-05-19 11:09 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] i50 depth transducer compatability
Welcome to the Raymarine Forum bwehmer,

Q. Does the i50 depth transducer fit into the thru hull of the ST50+ transducer?
A. Typically a ST50+ Depth instrument would have been mated to a through hull transducer requiring a 2" circular [censored]. The E70148 i50 Depth Pack includes a P319 Depth Thru-Hull Transducer which also requires a 2" circular [censored].
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication