Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] Grounding Radome

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Grounding Radome
12-10-19, 06:09 PM (This post was last modified: 12-11-19 11:07 AM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 1
Joined: Dec 2019
Reputation: 0
[CA11] Grounding Radome
I am new to installing anything Raymarine, and I got a new to me 18 inch HD Color radome to install. How do I properly ground this on my sailboat?

Separate question is how to plug it into the back of the c90w MFD? A waterproof cat 6 ethernet cable into the black coupler along with the ethernet cable end from the Radome?
Find all posts by this user
Quote this message in a reply
12-11-19, 11:13 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Grounding Radome
Welcome to the Raymarine Forum George,

Please click here to view a FAQ addressing how the radome should be interfaced to a C-Series Widescreen MFD. The Digital Radar Cable's green lead should should be addressed in the manner specified within the FAQ found here.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication