[DG] [DG11]Old Autohelm longshot
|
02-21-20, 06:17 PM
(This post was last modified: 02-24-20 08:03 AM by Derek - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[DG11]Old Autohelm longshot
I have an older no, areally old pre raymarine, pre seatalk Nautech AH4000. I'm hoping someone, anyone has the pinouts/colorcode for 4 wire electrical connection between 12v and the head/drive unit.
Colors are red/black and blue brown. I BELIEVE red and black are from 12v and blue and brown are to the drive unit. The mating connectors have a ground symbol and the numbers 1,2,3,. Thanks, Kurt |
|||
02-24-20, 08:15 AM
(This post was last modified: 02-24-20 08:18 AM by Derek - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [DG11]Old Autohelm longshot
Hi Kurt,
Thank you for your enquiry, Does the attached image help? Regards Derek |
|||
02-24-20, 01:49 PM
(This post was last modified: 02-24-20 02:04 PM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: [DG11]Old Autohelm longshot
Thank you for replying. I googled quite a bit for something like this but didn't come up with it. It's why I asked here. In the owners manual that I have, this wiring diagram doesn't exist. YESTERDAY while waiting for a reply here, I found this diagram in the GERMAN VERSION in Raymarine's document archives of outdated gear. A little translation and it indeed did the trick. The confusing part was that between the two connectors, it isn't blue to blue, red to red, etc. What I needed was the number designations for both halves. Luckily no damage was done when it was miswired. I was kinda hoping it WAS smoked so I could convince the wife it was time for a new EV pilot but fixing it yourself has it's own satisfaction as well.
It's great that you guys make the effort to support this really old gear. Kurt |
|||
02-25-20, 06:20 AM
Post: #4
|
|||
|
|||
RE: [DG11]Old Autohelm longshot
Hi Kurt,
Glad you are all sorted, always happy to try to help all the best Derek |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)