Raymarine forum / Raymarine Forums / Instruments v / adding new instruments to an ST60 setup

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
adding new instruments to an ST60 setup
06-10-16, 02:36 PM
Post: #1
PFishman Offline
Junior Member
**
 		Posts: 4
Joined: May 2016
Reputation: 0
adding new instruments to an ST60 setup
I have a e95 chartplotter that I just added to my ST60 system. I was looking for some additional displays. Are the i70 display units compatible with the ST60 system?
Find all posts by this user
Quote this message in a reply
06-10-16, 03:11 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: adding new instruments to an ST60 setup
Welcome to the Raymarine Forum PFishman,

The i70 MFID may indeed be interfaced to the devices which you have specified. The MFD and i70 MFD would be interfaced as spurs to a powered and properly terminated SeaTalkng backbone which included a SeaTalk to SeaTalkng Converter. The ST60 Instruments would be interfaced to the SeaTalk socket of the SeaTalk to SeaTalkng Converter. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication