[TG] [TG11] Gasket for Raystar RS 125 GPS
|
05-21-20, 04:39 PM
(This post was last modified: 05-26-20 10:48 PM by Tom - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[TG11] Gasket for Raystar RS 125 GPS
Hi,
I will be removing my GPS to replace the battery and am concerned the gasket is old and cracked. How do I get a replacement. A Google search doesn’t come up with any. Thanks! |
|||
05-26-20, 11:11 PM
Post: #2
|
|||
|
|||
RE: [TG11] Gasket for Raystar RS 125 GPS
Hello goblue55,
I don't think any Raymarine office would have that surface-mount gasket any longer. As far as I can see and remember it wasn't available as a spare, and the RS125 has been discontinued for a long time. And this brings me onto my second point: this antenna was designed in 2004 and was phased out a decade ago. Personally I wouldn't recommend spending a lot of time replacing that battery, firstly because based on questions I've received over the years, people tend to see a drop in sensitivity after opening and re-sealing the case (possibly through disturbing the antenna's grounding), and secondly because even if the replacement goes perfectly, time and effort is being expended on an antenna that has 2004-vintage sensitivity and accuracy. A modern RS150 will give 10Hz data update rate, will typically acquire a fix in <60s or so after power-up and will usually give an accuracy in good conditions of <1m. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)