Raymarine forum / Raymarine Forums / Fishfinders v / DSM300 no depth digits - bottom appears to plot correctly

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSM300 no depth digits - bottom appears to plot correctly
07-05-16, 11:06 AM
Post: #1
riptyler Offline
Junior Member
**
 		Posts: 9
Joined: Jun 2016
Reputation: 0
DSM300 no depth digits - bottom appears to plot correctly
Despite having sent back my DSM300 IN 2014 it once again doesn't seem to send depth numerically to E80s. The fishfinder page looks about right for bottom display but also shows nothing numerically. What can I do?
Find all posts by this user
Quote this message in a reply
07-05-16, 02:54 PM (This post was last modified: 07-05-16 02:59 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: DSM300 no depth digits - bottom appears to plot correctly
Welcome to the Raymarine Forum riptyler,

Please click here to view a FAQ addressing this subject. Please additionally click here to view a second FAQ addressing this subject. Should you have addressed the items specified within these FAQs and the problem persists, then it is recommended that the DSM be tested with another compatible transducer (suspended over the side of the hull) to rule out the possibility that the problem is being caused by a faulty transducer. Should you be unable to do so, then it is recommended that the DSM be sent to Raymarine’s Product Repair Center to be bench tested / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication