Raymarine forum / Raymarine Forums / Multifunction Displays v / MFD E140W

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MFD E140W
11-19-16, 12:21 PM
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 1
Joined: Nov 2016
Reputation: 0
MFD E140W
Try to update a pair of MFD E140W and at the end they were not working:
radar offset (1/3, 2/3)
AIS overlay radar
Radar overlay in the electronic chart.
Find all posts by this user
Quote this message in a reply
11-21-16, 10:21 AM (This post was last modified: 11-21-16 10:31 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: MFD E140W
Welcome to the Raymarine Forum Harry,

Please click here to view a FAQ addressing this subject. Should the system be interfaced to a source of heading, GPS, AIS data and should any of these data sources have been interfaced to the MFD's NMEA 0183 communications ports, then it would be recommended that you ensure that the port(s) has been correctly configured to match the BAUD rate of the device(s) which has been interfaced to it. It is also recommended that you ensure that you are under way and making way when using COG based features such as the Chart application's 1/3, 2/3 offset feature.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication