Raymarine forum / Raymarine Forums / Networking / System Integration v / Can the i70S, p70S, and p70RS support being daisy chained within a single spur?

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can the i70S, p70S, and p70RS support being daisy chained within a single spur?
02-02-17, 12:09 PM (This post was last modified: 02-02-17 12:11 PM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Can the i70S, p70S, and p70RS support being daisy chained within a single spur?
Can the i70S, p70S, and p70RS support being daisy chained within a single spur?

The NMEA 2000 Standard prohibits daisy chaining devices having a NMEA 2000 communications interface within a single spur. Instead, the NMEA 2000 Standard requires that each device having a NMEA 2000 communications interface be installed via a dedicated spur. As Raymarine will be seeking NMEA 2000 Certification for its latest generation of products having a SeaTalkng / NMEA 2000 communications interface, these products (ex. i70S, p70S, p70RS, etc.) will not feature two SeaTalkng / NMEA 2000 communications ports as were found on earlier Raymarine instrument displays (ex. i50, i60, ST70, etc.) and autopilot control heads (ex. p70, p70R, ST70, etc.).

RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication