Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lost depth function on RL70Cplus
03-24-17, 09:21 AM
Post: #1
Lost depth function on RL70Cplus
I have a 2004 Parker with a RL70Cplus display with DSM250 sounder module and GPS and radar functions. The boat has been drydocked since Sandy but now repairs are done. When I turned on display there was no depth function selection. The GPS and radar work fine. I have reset the RL70C and have played with the DSM to no avail. I restarted the DSM module and it has a green light indicating all is well. When I first looked at the module one of the cables was off, I believe the hsb cable but they are all plugged in and I get a green light. Any suggestions where the problem may lie?? Thanks
Find all posts by this user
Quote this message in a reply
03-24-17, 10:39 AM
Post: #2
RE: Lost depth function on RL70Cplus
Welcome to the Raymarine Forum 14Bayview,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)