Raymarine forum / Raymarine Forums / Autopilots v / ST 4000 control head

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST 4000 control head
03-08-16, 03:58 PM
Post: #1
harryjak Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2016
Reputation: 0
ST 4000 control head
I have/had an ST 4000 wheel pilot. During a move the compass and power head got misplaced. WHat can I use to power and control the drive? HJ
Find all posts by this user
Quote this message in a reply
03-09-16, 10:59 AM
Post: #2
Steve - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 318
Joined: Feb 2016
Reputation: 0
RE: ST 4000 control head
So the question is you have a Black MKI wheel drive, and you want to know if it can be used with current equipment?

Yes, the MKI wheel drive is compatible with the current EV-100 Wheel system.

You would need the E22166 p70 control head, the E70096 EV-1 Heading sensor, the E70098 ACU-100 and the R70160 Evolution cable pack.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication