Fuel Manager Problem

[9toes9]

i just purchased a new 2018 Crownline with an A65. I am receiving data from the engine. Tach, Oil pressure, temp. when i try to use the fuel manager i get the error my engine is not setup. i have attempted to setup up the engine in external devices, but the engine is not detected. Crownline stats that use use a gateway cable that should give me this data. what am i missing?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum 9toes9,

Please click here to view a FAQ addressing how engines may be interfaced to the MFD. Should your MFD be reporting engine data (ex. RPMs, oil pressure, fuel rate, etc.) then it would appear that the MFD has been properly interfaced to the engine system. However, many engine systems do not transmit PGN 127497 (Trip Fuel). In such cases, the MFD's Fuel Manager Set-up will need to be configured to Fuel Flow Rate. You will likely also need to configure Total Fuel Capacity within the same Set-Up menu.