Raymarine forum / Raymarine Forums / Instruments v / AIS antenna installation

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS antenna installation
09-28-17, 01:46 PM
Post: #1
CaptainIJ Offline
Junior Member
**
 		Posts: 3
Joined: Aug 2017
Reputation: 0
AIS antenna installation
The deck area with the most unobstructed view of the sky where I installed the antenna is thicker than the M3X40 studs provided. I am short by 1/2 inch. Is Raymarine able to provide longer M3X40 studs? I am having a difficult time finding anyone that can supply these longer studs to secure the antenna.
Find all posts by this user
Quote this message in a reply
09-28-17, 02:56 PM (This post was last modified: 09-28-17 02:59 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: AIS antenna installation
Welcome to the Raymarine Forum,

Unfortunately, Raymarine does not offer longer threaded brass rods. You may want to consider searching the internet for M3 brass threaded rod, as I believe that you may find this rod in lengths up to 3m, which may then be cut to suit your needs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication