Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] p70 bezel update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] p70 bezel update
01-20-18, 11:19 AM (This post was last modified: 01-23-18 05:04 PM by Chuck - Raymarine - Moderator.)
Post: #1
tgsail1 Offline
Junior Member
**
 		Posts: 8
Joined: Nov 2017
Reputation: 0
[CA] p70 bezel update
Hi- I just purchased an i50 and an i70s. My system has an existing p70. The i50 came with a second bezel and cover which are color and shape matched to the i70s. Will the same bezel and cover fit the p70 (it looks like it might)? If not,do you have a bezel upgrade for the p70 which matches the i70s? I don't know what the part numbers might be for any of these bezel/cover combinations.
Thanks
Find all posts by this user
Quote this message in a reply
01-23-18, 05:05 PM (This post was last modified: 01-23-18 05:25 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] p70 bezel update
Welcome back to the Raymarine Forum tgsail1,

Bezels designed for use with i50, i60, and i70 instruments may also be used with p70 and p70R autopilot control heads. The part number for the black bezel for these products is A80355.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication