Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] DSM300 to C-125

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] DSM300 to C-125
03-01-18, 02:37 PM (This post was last modified: 03-02-18 11:31 AM by Chuck - Raymarine - Moderator.)
Post: #1
Diegosub Offline
Junior Member
**
 		Posts: 3
Joined: Aug 2017
Reputation: 0
[CA] DSM300 to C-125
Hi,
I would like to know what cable I'll need to conect DSM300 to a C125 display.
Thanks a lot
Regards,
Find all posts by this user
Quote this message in a reply
03-02-18, 11:44 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] DSM300 to C-125
Diegosub,

The Ethernet (SeaTalkhs) interface of a DSM30 or DSM300 may be interfaced to the Ethernet (RayNet) interface of an a/c/e/eS/gS-Series MFD via a cable assembly which has been constructed from an A80272 RayNet (M) Pins to SThs (M) Socket Adaptor Cable and an appropriate length of RayNet (F) to RayNet (F) Cable.
Find all posts by this user
Quote this message in a reply
04-18-18, 08:57 AM (This post was last modified: 04-18-18 09:10 AM by Chuck - Raymarine - Moderator.)
Post: #3
Diegosub Offline
Junior Member
**
 		Posts: 3
Joined: Aug 2017
Reputation: 0
RE: [CA] DSM300 to C-125
So, will be 2 cables? A80272 and A62361(2m is enough)
Find all posts by this user
Quote this message in a reply
04-18-18, 09:11 AM (This post was last modified: 04-18-18 09:12 AM by Chuck - Raymarine - Moderator.)
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] DSM300 to C-125
Diegosub,

Yes.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication