[CA] RV100 Frequency

[karlista]

What frequencies does the RV100 pig at? I am installing two Axiom Pro RVX 12's with the RV100 transducer and also the B175H-W and M265LM. With such a wide band of frequencies with all these transducers, I am concerned that any one of these transducers could interfere with the RV100. Thanks.

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Karlista,

Please click here to view a FAQ addressing this subject. One should expect minimal, if any, interference between a RV or DownVision transducer and high power CHIRP transducers. One of the advantages of CHIRP technology is that the transducers transmit across a range of frequencies rather than a fixed frequency. Accordingly, the chances of two CHIRP transducers pinging at the same frequency at exactly the same time are minimal.

[karlista]

Thanks Chuck for the reply. The only potential I see is for the the CHIRP Conical sonar transducer elements pinging around a 60 kHz range centered at 200 kHz. There could be a crossover of the frequencies with the B175H-W.

[Chuck - Raymarine - Moderator]

karlista,

Again, our experience has indicated that one should expect minimal, if any, interference between a RV or DownVision transducer and high power CHIRP transducers.

[karlista]

Thanks Chuck. Hoping to complete the project in two more weeks. I will share share some pics and results with the forum.

[Chuck - Raymarine - Moderator]

You're welcome.