European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[CA] [CA11] Auto pilot
|
|
05-31-18, 08:30 AM
(This post was last modified: 06-01-18 10:08 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA11] Auto pilot
I will soon be having an Auto pilot installed on my boat .. The Dealer will be doing it and I would prefer to stay with all Raymarine. My MFD is an e127. The boat is a 30 foot Grady White marlin with twin F250 Yamaha Outboards ., Seastar power assist steering and each motor has a hydraulic cylinder. I believe they are HC5345's. ... Basically I want to double check that the dealer installs the proper pump and system .. So can you tell me what you would install if it were your boat. ?
In advance .. Thanks |
|||
|
|
06-01-18, 10:30 AM
(This post was last modified: 06-01-18 10:37 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: [CA11] Auto pilot
Welcome to the Raymarine Forum Tony,
Should the steering rams be installed in series (most common) rather than parallel, then a Type 1 Hydraulic Pump would be used for this application. The Type 1 Pump will be installed between the power assist pump and the steering ram. Should the vessel feature a 12V electrical system, then it would be recommended that an EV-150 be installed for this application. |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)