Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] MFD autopilot control

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] MFD autopilot control
06-03-18, 07:48 PM (This post was last modified: 06-04-18 02:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
cstotland Offline
Junior Member
**
 		Posts: 9
Joined: Nov 2016
Reputation: 0
[CA11] MFD autopilot control
Looking to replace our existing e7d MFD with a newer unit. It appears that the new axioms do not support autopilot control. I'm seeing autopilot control supported in the es75 series. However compatibility information only shows the Evolution series. I have an older SPX unit and am wondering if that will be supported by the Es75. The documentation does not reflect any mention of SPX that I'm able to find.
Find all posts by this user
Quote this message in a reply
06-04-18, 02:06 PM (This post was last modified: 06-04-18 02:23 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] MFD autopilot control
Welcome back to the Raymarine Forum Cary,

In fact, MFDs running LightHouse 3 software do indeed have an Autopilot Controls feature, but it is only supported for use with Evolution autopilots. Please click here to view a FAQ addressing and providing more information on this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication