Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] network 2 different mfd's

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] network 2 different mfd's
06-08-18, 10:58 AM (This post was last modified: 06-08-18 02:28 PM by Chuck - Raymarine - Moderator.)
Post: #1
andrewden Offline
Dru
**
 		Posts: 2
Joined: Apr 2016
Reputation: 0
[CA11] network 2 different mfd's
I apologize if this is a repeat question. I currently have a c95 MFD and was wondering if I can network a different raymarine model to it. I am looking at either an axiom (7 DV) or an a series (a78) model. Can this be done?
Thanks.
Find all posts by this user
Quote this message in a reply
06-08-18, 02:33 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] network 2 different mfd's
Welcome to the Raymarine Forum andrewden,

While your c95 MFD may be interfaced to any model of a/c/e/eS/gS-Series MFD running LightHouse II v19.03 software to support sharing of all resources and data except for NTSC/PAL video sources, the c95 MFD would not be so for an Axiom/Axiom Pro/Axiom XL MFD. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication