Raymarine forum / Raymarine Forums / Radar v / Installing a RD418D Digital Radar Dome on E140 W

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Installing a RD418D Digital Radar Dome on E140 W
04-11-16, 02:11 PM
Post: #1
alxxxx Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2016
Reputation: 0
Installing a RD418D Digital Radar Dome on E140 W
Installing a RD418D Digital Radar Dome on a 2012 BW 280 Outrage with an existing 2012 E140W
Do I need a Seatalk Crossover coupler and what cables are needed. A 10M cable A55077 was included with the unit.
Find all posts by this user
Quote this message in a reply
04-11-16, 03:12 PM (This post was last modified: 04-11-16 03:12 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Installing a RD418D Digital Radar Dome on E140 W
Welcome to the Raymarine Forum alxxxx,

As the Digital Radar Cable now packaged with Raymarine MFDs features a RayNet (F) plug on the MFD end of the cable, it is not necessary to install a SeaTalkhs Crossover Coupler as part of the installation. Instead, an A80272 RayNet (M) to SeaTalkhs (M) Adapter will be fitted between the Digital Radar Cable and the MFD's SeaTalkhs socket.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication