Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Mfd a78 not displaying all waypoints

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Mfd a78 not displaying all waypoints
07-24-18, 11:40 PM (This post was last modified: 07-27-18 09:21 AM by Chuck - Raymarine - Moderator.)
Post: #1
Cescobar Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2018
Reputation: 0
[CA11] Mfd a78 not displaying all waypoints
I have a mfd a78 that has around 400 fishing waypoints loaded into it. I cannot figure out how to get them to display on the screen. Waypoints are from navionics, and others are saved in a gpx file.
Find all posts by this user
Quote this message in a reply
07-27-18, 09:26 AM (This post was last modified: 07-27-18 09:28 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Mfd a78 not displaying all waypoints
Welcome to the Raymarine Forum Cescobar,

To show all waypoints within the Chart application page/pane being viewed, use the command sequence MENU->MY DATA->WAYPOINT->Highlight the ALL WAYPOINTS group->SHOW/HIDE->SHOW ALL. This feature is covered in detail within Chapter 13.1 - Waypoints of the LightHouse II Release 19 Operating Instructions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication