Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Alarms on new Axiom Pro System

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Alarms on new Axiom Pro System
08-07-18, 09:23 AM (This post was last modified: 08-14-18 01:55 PM by Chuck - Raymarine - Moderator.)
Post: #1
carlmk Offline
Junior Member
**
 		Posts: 42
Joined: Oct 2017
Reputation: 0
[CA11] Alarms on new Axiom Pro System
1. Is there an alarm for lost GPS signal?
3. Radar does not seem to alarm even when a Boat is in 1/2 mile zone. AIS alarms work fine. My settling seem ok. Any thoughts.
Find all posts by this user
Quote this message in a reply
08-14-18, 02:02 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Alarms on new Axiom Pro System
Welcome to the Raymarine Forum carlmk,

Q1. Is there an alarm for lost GPS signal?
A1. Yes.

Q2. Radar does not seem to alarm even when a Boat is in 1/2 mile zone. AIS alarms work fine. My settling seem ok. Any thoughts.
A2. Have you configured a guard zone? If so, was the target located within the configured guard zone when it was configured or did the target move from outside to inside the guard zone?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication