Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ACU 100 wheel drive output

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ACU 100 wheel drive output
08-17-18, 11:12 PM (This post was last modified: 09-13-18 03:07 PM by Chuck - Raymarine - Moderator.)
Post: #1
Thombusc Offline
Junior Member
**
 		Posts: 7
Joined: Jul 2018
Reputation: 0
[CA11] ACU 100 wheel drive output
My new EV1/AVU100 set up is having voltage issues. I have a solid 12.5 - 13.6 power to the ACU but the output to the wheel drive motor is only 6.5 v. Is this right? If not, any idea what’s up?

thx
.¤º°`°º¤,¸¸,¤º°`°º¤¤º°`°º¤,
Tom Buscaglia
SV Alera
C&C 37+/40
Vashon Island WA
http://www.sv-alera.com
Visit this user's website Find all posts by this user
Quote this message in a reply
09-13-18, 03:09 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ACU 100 wheel drive output
Welcome to the Raymarine Forum Tom,

The measured voltage across the Motor A/P terminals appears to be correct for the ACU-100.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication