[CA] [CA11] A127 Needing Transducer Options

[[email protected]]

Thanks Chuck. I reviewed the manual for the new Tri-Data, and didn't see the ability to individually set them, but if I read between the lines so to speak, I think I can see how I would set just the depth to repeater mode, and not the speed.

As always, thanks so much for getting back to me and your patience!

Dave

[Chuck - Raymarine - Moderator]

Dave,

Unfortunately, the manuals for the ST60/ST60+ instruments omitted information concerning how to configure master/slave settings. Please click here to view a FAQ addressing this subject.

[[email protected]]

Hey Chuck, my reseller is indicating problems with getting the B60 transducer. The recommendation is a A80447. I have checked and know that a 20 degree unit will work best. Can you advise if the A80447 will be able to direct connect to an A127 to provide both depth and underwater landscape view? I understand that the A80447 is plastic which is fine, (same as the old transducer that will come out).

If the A80447 is OK, can you include a link to the product so that I can check out physical dimensions?

tks

Dave

[Chuck - Raymarine - Moderator]

Dave,

The 600W fishfinder circuitry to of the ax7/cx7/e7D/ex7/eSx7 MFDs is exclusively designed to function in conjuction with a compatible 600W or 1kW 50kHz/200kHz fishfinder transducer. The A80447 is not such a transducer. The A80447 is a CPT-S transducer which is designed to be interfaced to the transducer of an ax8/eSx8 MFD, Axiom DV MFD, or CP100 DownVision Sounder Module. If seeking to use a CPT-S transducer with an ax7/cx7/e7D/ex7/eSx7 MFD, it would be necessary to interface the CPT-S transducer to an ax8/eSx8 MFD or CP100 DownVision Sounder Module, which in turn would be interfaced to the ax7/cx7/e7D/ex7/eSx7 MFD.

Alternatively, you may want to consider adapting (part #E66066) one of the CP370 compatible B60 transducers to permit the transducer to be mated to your MFD's fishfinder Transducer socket.

[[email protected]]

So there is no plastic, thru-hull transducer with only depth or depth/temperature that can be direct connected to the A127?

tks

Dave

[Chuck - Raymarine - Moderator]

Dave,

Raymarine offers no plastic tilted element transducers.