Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] MFD a65 and aux

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] MFD a65 and aux
02-11-19, 10:55 AM (This post was last modified: 02-11-19 11:27 AM by Chuck - Raymarine - Moderator.)
Post: #1
sran Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2019
Reputation: 0
[CA11] MFD a65 and aux
I have a A65 plotter (the classic one) and it has AUX port but I'm not able to find any documentation about it.

What is it? And specially is it capable to work as a VGA input? If so what is the pin layout?
Find all posts by this user
Quote this message in a reply
02-11-19, 11:33 AM (This post was last modified: 02-11-19 11:36 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] MFD a65 and aux
Welcome to the Raymarine Forum sran,

While there may have been an unannounced future plan for the AUX port of the A60/A65 Chartplotters and Chartplotter/Fishfinders, the software of the A60/A65 never supported any features via the display's AUX port. As the A60/A65 displays were designed for smaller vessels, I strongly doubt that it AUX port was intended to have supported video output via an unreleased future software update.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication