Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] CP470 with B175H-W

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] CP470 with B175H-W
03-08-19, 11:05 AM (This post was last modified: 03-08-19 11:13 AM by Chuck - Raymarine - Moderator.)
Post: #1
Twinpower Offline
Junior Member
**
 		Posts: 4
Joined: Aug 2018
Reputation: 0
[CA11] CP470 with B175H-W
I have CP470 with B765LM transducer and it's working fine.

I would like to replace old B765 transducer to new (single) wide beam B175H-W (A80321) transducer.

When B175 is directly connected to CP470, message "Transducer not connected" appears on the screen.

I assume that "Single B75/B175 Operation Cable" (A80328) is needed to get it work?
Find all posts by this user
Quote this message in a reply
03-08-19, 11:13 AM (This post was last modified: 03-08-19 11:13 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] CP470 with B175H-W
Welcome to the Raymarine Forum Twinpower,

Q. I assume that "Single B75/B175 Operation Cable" (A80328) is needed to get it work?
A. Correct.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication