Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Micronet not seeing transducers

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Micronet not seeing transducers
06-19-19, 05:58 PM (This post was last modified: 06-21-19 03:13 PM by Chuck - Raymarine - Moderator.)
Post: #1
jtis1 Offline
Junior Member
**
 		Posts: 4
Joined: Mar 2019
Reputation: 0
[CA11] Micronet not seeing transducers
I have a new boat with Micronet wireless net that is not "seeing" the wind (tacktic), depth and speed transducers (Airmar) most of the time. Under "data sources" on the Axiom 7 chartplotter, sometimes the transducers show up but often after a "search" of data sources nothing shows up. GPS and heading show up reliably everytime. All connections are good. Micronet is picked up by all other wireless instrument heads including Dual Maxi and Racemaster displays, but these displays show no data for depth, wind and speed. How can I troubleshoot this system so that at least the Airmar triducer shows up ALL the time?
Find all posts by this user
Quote this message in a reply
06-21-19, 03:15 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Micronet not seeing transducers
Welcome to the Raymarine Forum jtis1,

How have you interfaced the TackTick system to the Axiom MFD?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication