Raymarine forum / Raymarine Forums / Product Selection Assistance v / [TG] Tilted Element Transducer Compatability

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Tilted Element Transducer Compatability
08-07-19, 08:31 AM (This post was last modified: 08-15-19 11:17 PM by Tom - Raymarine - Moderator.)
Post: #1
phocjr Offline
Junior Member
**
 		Posts: 1
Joined: May 2019
Reputation: 0
Tilted Element Transducer Compatability
Hi - I have a Raymarine Axiom 12 GPS unit and would like to install a tilted element thru hull transducer. Specifically looking at B75M or B175M. Can you please tell me if those are compatible with my GPS unit and if i will need any special cable connectors? Thanks
Find all posts by this user
Quote this message in a reply
08-15-19, 11:19 PM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: Tilted Element Transducer Compatability
Hello phocjr,

No, those transducers are compatible with Axiom Pro but not standard Axiom, I'm sorry to say. To use them with a standard Axiom you would need a CP470 or CP570 black-box sounder module.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication