Raymarine forum / Raymarine Forums / Marine Cameras v / [CA] [CA11] CAM210ip Focus Problem.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] CAM210ip Focus Problem.
11-16-19, 02:08 PM (This post was last modified: 11-18-19 10:37 AM by Chuck - Raymarine - Moderator.)
Post: #1
john744 Offline
Junior Member
**
 		Posts: 10
Joined: Feb 2016
Reputation: 0
[CA11] CAM210ip Focus Problem.
CAM 210ip installed via HS5 network switch to a Axiom Pro 12 RVX with LH3 ver 3.10.42. The initial installation went fine producing a clean crisp image. Now after a few weeks of intermittent use, the image is out of focus. (lens is not dirty) A Forum and documentation search uncovered no references to focus adjustment. Attached file is image screen shot taken from the Axiom Pro. Please advise.
Visit this user's website Find all posts by this user
Quote this message in a reply
11-18-19, 10:39 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] CAM210ip Focus Problem.
Welcome to the Raymarine Forum John,

Unfortunately, the problem reported is not indicative of an issue with the camera's settings, but is instead indicative of a problem within the camera's components. It is accordingly recommended that the camera be returned to your dealer for replacement (if purchased within the last 30 days) or sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication