Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] E12196 ST70 Autopilot Control Head

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E12196 ST70 Autopilot Control Head
12-19-19, 02:40 PM (This post was last modified: 12-19-19 04:01 PM by Chuck - Raymarine - Moderator.)
Post: #1
AndrewSimon Offline
Junior Member
**
 		Posts: 11
Joined: Aug 2017
Reputation: 0
[CA11] E12196 ST70 Autopilot Control Head
Will the E12196 work with a ACU400?
Find all posts by this user
Quote this message in a reply
12-19-19, 04:13 PM (This post was last modified: 12-19-19 04:13 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] E12196 ST70 Autopilot Control Head
Welcome back to the Raymarine Forum Andrew,

When updated with the latest ST70 autopilot control head software, a ST70 autopilot control head may be used as a secondary autopilot head in conjunction with an Evolution autopilot. An Axiom/Axiom Pro/Axiom XL MFD or p70S/p70RS/p70/p70R autopilot control head must also be interfaced to the powered and properly terminated SeaTalkng / NMEA 2000 backbone to which the other Evolution autopilot components have also been interfaced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication