Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Integration old and new

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Integration old and new
02-12-20, 10:14 PM (This post was last modified: 02-13-20 11:17 AM by Chuck - Raymarine - Moderator.)
Post: #1
ray42628 Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2016
Reputation: 0
Bug [CA11] Integration old and new
I have existing 2 E Series MFD and I have purchased 2 new Axion 9 and axiom 9 PRO. I have digital Radar, ST60+ Depth,speed,wind, wind CH. and Serious Weather. I have one HS 8 port switch and digital radar.

I will replace the Auto Pilot with EV1 system and I have a HS5 network switch.

Can I connect the older HS 8 port switch to the HS5 Switch.
What is the best way to integrate the old with the new and keep the ST60 instruments working but interface to the Seatalkng.
Find all posts by this user
Quote this message in a reply
02-13-20, 11:19 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Integration old and new
Welcome to the Raymarine Forum ray42628,

Are you seeking to replace the currently installed E-Series MFDs with the Axiom 9 and Axiom Pro 9 MFDs ... or are you seeking to keep the E-Series MFDs and add the Axiom 9 and Axiom Pro 9 MFDs to the existing system?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication