Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Axiom Power/SeaTalk cable extension

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Power/SeaTalk cable extension
03-27-20, 08:45 AM (This post was last modified: 03-27-20 11:03 AM by Chuck - Raymarine - Moderator.)
Post: #1
lukerabun Offline
Junior Member
**
 		Posts: 13
Joined: Aug 2019
Reputation: 0
[CA11] Axiom Power/SeaTalk cable extension
The power cable for my axiom 12 has the integrated seatalk cable in it. However the the network cable is not long enough.

What is the cleanest way to extend a spur cable (the white cables)?

Do they make couplers for the blue and white cables?

Thanks in advance
Find all posts by this user
Quote this message in a reply
03-27-20, 11:08 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom Power/SeaTalk cable extension
Welcome to the Raymarine Forum lukerabun,

Please click here to view a FAQ addressing this subject. As indicated therein, an A06082 SeaTalkng (M) to DeviceNet (F) Adaptor may be used for this purpose. Please note that the maximum cable length of the resulting spur should not exceed 6m.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication