Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] e80 series change to axiom pro 9
04-13-20, 12:35 PM (This post was last modified: 04-13-20 02:14 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] e80 series change to axiom pro 9
based on what I found online, i purchased an axiom pro 9 to replace my e80 series; the cables I have on the old system do not fit the new (despite me thinking this was the recommended upgrade model) - does anyone have any advise on what I need to install (conversion cables etc)? a pic of the e80 is attached; i am not so bothered about fish finding capabilities, more depth, temp and gps)
thanks


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
04-13-20, 02:35 PM (This post was last modified: 04-13-20 02:36 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] e80 series change to axiom pro 9
Welcome to the Raymarine Forum David,

Please click here to view a FAQ addressing replacement of an E-Series Classic MFD with an Axiom Pro MFD. I believe that it will address all of your questions. Should you need further clarification, we'll be standing by. At that time we would need to know what the E80 is presently interfaced to and which specific model of Axiom Pro 9 MFD has been purchased.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)