Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / [CA] [CA11] Dampening RPM readouts - Axiom/ Lighthouse

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Dampening RPM readouts - Axiom/ Lighthouse
04-16-20, 10:38 AM (This post was last modified: 04-16-20 12:20 PM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2020
Reputation: 0
[CA11] Dampening RPM readouts - Axiom/ Lighthouse
Is it possible to dampen the RPM data display to smooth the rapid changes? The dampening or averaging at the display level is what i need to accomplish.

Data is being transmitted from the engine control module via a Yacht Devices YDES-04N.
Find all posts by this user
Quote this message in a reply
04-16-20, 12:23 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Dampening RPM readouts - Axiom/ Lighthouse
Welcome to the Raymarine Forum Steve,

Unfortunately, the feature which you have inquired about is not currently supported by LightHouse 3 software. A feature request will be added to consider addition of engine dampening to a future LightHouse 3 software update.

Please click here for more information concerning product and feature suggestions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication