Raymarine forum / Raymarine Forums / Marine Weather / Satellite Radio v / [CC] [CC11] SR200 SST layer on Axiom Pro

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CC] [CC11] SR200 SST layer on Axiom Pro
06-01-20, 03:44 PM (This post was last modified: 06-11-20 01:01 AM by Tom - Raymarine - Moderator.)
Post: #1
Grady330 Offline
Junior Member
**
 		Posts: 16
Joined: Jun 2017
Reputation: 0
[CC11] SR200 SST layer on Axiom Pro
Is there a way to have the SST data actually lay over a real chart with waypoints, contours, etc? It's great data but it lays over a blank chart. Let me know. Thanks!
Find all posts by this user
Quote this message in a reply
06-16-20, 02:54 PM
Post: #2
Chris - Raymarine - Moderator Offline
Senior Member
****
 		Posts: 266
Joined: May 2016
Reputation: 0
RE: [CC11] SR200 SST layer on Axiom Pro
Hello Grady330,

The closest to what you are doing is to overlay the weather radar on the chart. To veiw the SST specifically you do need to switch from chart to weather in the menu,

Chris,


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication