Raymarine forum / Raymarine Forums / Autopilots v / Type 2 linear hydraulic

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Type 2 linear hydraulic
09-19-16, 10:41 AM
Post: #1
GWB Offline
Junior Member
**
 		Posts: 7
Joined: Aug 2016
Reputation: 0
Type 2 linear hydraulic
Good morning,
I'm looking for a part number for the actuator with built in clutch. I do not need the pump as it is still good. The type of actuator I have is round, not square and the hoses attach on top, not from the rear. Please advise as to a part number for the complete cylinder with built in clutch - without the pump
Thanks
Find all posts by this user
Quote this message in a reply
09-19-16, 02:01 PM (This post was last modified: 09-19-16 02:06 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Type 2 linear hydraulic
Welcome to the Raymarine Forum GWB,

Raymarine's Hydraulic Linear Drives are manufactured and sold as a complete closed system. Unfortunately, Raymarine does not separately sell the parts which make up its hydraulic linear drives. Please click here to view a FAQ addressing this subject and providing recommendations for repair these drives.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication