Raymarine forum / Raymarine Forums / Fishfinders v / Wiring diagram / pin-out for transducer for ax7/cx7/e7D/ex7/eSx7 MFDs

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wiring diagram / pin-out for transducer for ax7/cx7/e7D/ex7/eSx7 MFDs
10-14-16, 11:03 AM (This post was last modified: 01-10-17 04:10 PM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Wiring diagram / pin-out for transducer for ax7/cx7/e7D/ex7/eSx7 MFDs
Wiring diagram / pin-out for transducer for ax7/cx7/e7D/ex7/eSx7 MFDs

Please find wiring diagram / pin-out for transducers which are designed to be directly mated to the Transducer socket of the following MFDs and fishfinding products to support 50/200kHz fishfinding feature within the MFD or fishfinding product:
- ax7 MFDs (where x the diagonal dimension of the MFD's display (6, 7, 9, 12)
- cx7 MFDs (where x the diagonal dimension of the MFD's display (9, 12)
- e7D MFD
- ex7 MFDs (where x the diagonal dimension of the MFD's display (6, 7, 9, 12, 16)
- eSx7 MFDs (where x the diagonal dimension of the MFD's display (6, 7, 9, 12, 16)
- DS400X
- DS500X
- DS600X
- DSM25


[Image: attachment.php?aid=615]


RAYFAQ#


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication