Raymarine forum / Raymarine Forums / Networking / System Integration v / 5-Way Connectors in series

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
5-Way Connectors in series
11-29-16, 03:19 PM
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 8
Joined: Nov 2016
Reputation: 0
5-Way Connectors in series
Can two SeaTalk NG 5-Way connectors be placed in series provided the 5-Way units are connected to one another via backbone cable and properly terminated, etc.?
Find all posts by this user
Quote this message in a reply
11-29-16, 04:06 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: 5-Way Connectors in series
Welcome to the Raymarine Forum mlpayne,

Linking SeaTalkng 5-Way Connectors in the serial manner described is correct and exactly how SeaTalkng backbone components (ex. 5-Way Connectors, T-Pieces, Inline Coupler, SeaTalk to SeaTalkng Converter) are designed to be connected to one another.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication