Raymarine forum / Raymarine Forums / Networking / System Integration v / New Raymarine Component Network

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Raymarine Component Network
05-05-17, 07:49 PM
Post: #1
Tamrow Offline
Junior Member
**
 		Posts: 25
Joined: Dec 2016
Reputation: 0
New Raymarine Component Network
I have finally received all my new Raymarine components and I'm ready to install. Before I start I'd like to have my network setup checked. I have attached a PDF with my network diagram. Could you take a look and let me know if it is correct and provide feedback if changes need to be made. Thank you
Find all posts by this user
Quote this message in a reply
05-09-17, 03:23 PM (This post was last modified: 05-09-17 03:23 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: New Raymarine Component Network
Welcome to the Raymarine Forum Tamrow,

Your diagram now appears to be correct in all but one point ... the power insertion spur should be positioned at the approximate midpoint of the backbone's LEN load.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication