Raymarine forum / Raymarine Forums / Networking / System Integration v / Interfacing two devices supporting SeaTalkng / NMEA 2000 communications

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interfacing two devices supporting SeaTalkng / NMEA 2000 communications
06-02-17, 10:53 AM (This post was last modified: 06-02-17 11:04 AM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Interfacing two devices supporting SeaTalkng / NMEA 2000 communications
Interfacing two devices supporting SeaTalkng / NMEA 2000 communications

It is not possible to interface two devices support SeaTalkng / NMEA 2000 communications to one another via a single SeaTalkng / NMEA 2000 spur cable to support communications with one another. Instead, such devices are designed to be interfaced as individual spurs to a powered and properly terminated SeaTalkng backbone.

[Image: SeaTalkng%20new%20network%20diagram.jpg]

Please click here to view a FAQ addressing how a simple backbone may be created to interface two devices devices supporting SeaTalkng / NMEA 2000 communications. Please click here to view a FAQ addressing how to interface a NMEA 2000 device having a DeviceNet (M) plug to a SeaTalkng backbone.


CRAFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication