Raymarine forum / Raymarine Forums / Multifunction Displays v / NMEA 2000 Seatalk NG

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NMEA 2000 Seatalk NG
06-21-17, 10:33 AM
Post: #1
eric1528 Offline
Junior Member
**
 		Posts: 28
Joined: Mar 2016
Reputation: 0
NMEA 2000 Seatalk NG
I have dual C127 units, I have patched my engine data into the slave unit via the seatalk NG plug in the back of the unit but it will not work and does not recognize it. I removed the seatlkNG plug(which is for the Evolution 200 autopilot) from the other unit which is tabbed data master and put the seatalkng from the engines into it and it works. Can only the unit tabbed as data master except a seatalkng cable?
Find all posts by this user
Quote this message in a reply
06-22-17, 09:51 AM (This post was last modified: 06-22-17 10:00 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: NMEA 2000 Seatalk NG
Eric,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication